WORK Lanvec LM1 19x7.5J +53 114.3 5H 2-Piece Mesh Wheels & Tires, Set of 4

This is a used set of four WORK Lanvec LM1 19-inch two-piece wheels with a grimmit-silver mesh design, mounted with Maxxis Victra Sport5 225/40R19 tires manufactured in 2021 (17th week). Wheel specs are 19x7.5J, +53 offset, 114.3mm PCD, 5-hole. The seller notes this +53 offset suits mid-size minivans for a flush dress-up look and lists example fitments including Toyota Alphard/Vellfire, Harrier, Estima, and Mazda Atenza/Axela on the same 114.3-5H bolt pattern, though actual fitment depends on vehicle grade and modifications (lowering, fender work, camber adjustment); on a car with stock ride height there is a high chance of fender or suspension interference. The wheels show scratches (seller asks buyers to check photos closely for detail), and remaining tire tread is thin at roughly 4mm measured at the center, so the seller recommends replacing the tires soon and checking photos for cracking or puncture repair marks. Included are the wheels and tires only; included accessories (nuts, center caps, wheel caps) should be confirmed from the photos, as only what is pictured is included.

Seller describes the set as used with some scratches and dirt (やや傷や汚れあり) and asks buyers to check photos closely for wheel scratches; tire tread is low at about 4mm remaining, so replacement is recommended soon and buyers should inspect photos for cracking or puncture repairs.