OZ Racing FUTURA FD3S Special 19-inch Wheel Set

A fully restored set of four OZ Racing FUTURA three-piece wheels rebuilt specifically for the RX-7 FD3S, using a genuine 67.1mm hub-bore FD3S-fitment base and rare OZ Racing factory 19-inch double-step rims (a bonded outer/inner rim assembly plus center disc rather than the usual fully separable three-piece design). Sizing is front 8.5J x19 ET45 and rear 10J x19 ET45, PCD 5x114.3. The seller states the rims used have no cracks and no history of crack repair. Restoration work included powder silver/clear finish on the center discs and caps, mirror-polished barrel with clear coat and reproduced OZ rim decals on the outer lips (no material removed by grinding), half-matte black powder coat on the inner barrels, cleaned/replated genuine OZ 10.9 chrome pierce bolts (later tall FUTURA type), and sandblasted/powder-coated genuine 10-point nuts. Fitted with a rare M296 center cap (originally an MAE-spec part) paired with an Anfini ornament. Included: 4 wheels, full set of M296 center caps, genuine security bolts, genuine special tool and snap ring, and used-but-good valve stems. The acrylic anti-reproduction plate shown in photos is not included.

Seller describes this as a full restoration built from a used wheel base, listed as 'like new,' with no major bends, cracks, or crack-repaired parts; very minor casting marks or age-related traces typical of a non-new restored wheel may remain.