Nakatетsu Custom Steel Wheels Wide Deep Rim 13×7J±0 & 8.5J-15 4H114.3 Set of 4

Custom-built steel wheels fabricated from used wheel cores and hand-welded. Set of four: two wheels 13×7J±0 and two wheels 8.5J-15, both 4H114.3 bolt pattern. Hub diameter 73mm. Deep dish rims suitable for street or show use. Seller notes that caliper clearance is tight; fitment requires spacers (wide tread) or vehicles with drum brakes or no brake interference. Handmade measurements may vary ±2–3mm. Simple paint finish applied. Air-leak tested on mounted tires before shipping; if leaks occur within three months of purchase, seller will repair via warranty (return freight prepaid by buyer, return shipment prepaid by seller) provided wheels remain in original condition. Paint damage from buyer modification voids warranty. Not street-legal; for off-road or show use only. Seller conducted durability testing on private property with a kei truck at 60 km/h over rough terrain under load with no observed issues. Tire mounting available for additional fee. Seller grades as new/unused (created from used cores but never installed).

Seller grades this as new/unused; however, wheels are handmade from used cores with simple paint finish and measured ±2–3mm tolerance. Minor scratches and thin cracks may be present beyond what photos show.